This reproduction panel is meant to fit above and behind the stock bench seat, between the seat and the rear window.  After 40+ years, many OEM versions are tired out and warped or ruined beyond repair.  This panel has been professionally upholstered in original Marine Blue German Vinyl (the $50+/yd expensive material) to best match the original materials that came in the car from the factory nearly 50 years ago.  The panel is wrapped in thin foam followed by the vinyl, and stapled into place on the back side.

The panel board is made of 3/16" plywood and has been remanufactured by first digitizing several used, but straight panels, then using a computer controlled (CNC) router machine to cut the new panel.  The panel is about 2 times the original panel thickness to provide some rigidity and a thick enough substrate so you can upholster it and have enough thickness to allow upholstery staples to secure to the wood.  The advantage of the plywood over the fiberboard is that if the plywood gets wet, it will swell, then contract back to its original thickness when it dries. The original fiberboard will not shrink back to its original thickness when it dries.

Includes 1 panel as shown.